Fill and Base Material Delivered in Ashmore, IL

Illinois Rock Supply handles gravel and aggregate delivery in Ashmore, IL, and the ground here sets the terms. Across the Grand Prairie till plain of central and eastern Illinois, deep prairie silt loam sits over dense clay subsoil on ground with almost no natural fall.

Water stands rather than runs. That is why a building pad or drive usually needs fill first, then a compacted CA-6 base course over it.

Delivery to Ashmore and the Surrounding Area

You order online and pick a quantity by the ton or by the yard. Each product page has a calculator if you want to size the load before checkout, and you choose a delivery date there.

A dump truck tips the material on site in one pile. Ashmore sits in Coles County, and delivery covers the town and the surrounding area, including Charleston, Mattoon, Oakland, Humboldt and Lerna.

Materials for Ashmore Projects

The flat ground here is the reason fill and sub-base carry so much weight in a project. Before a pad, a drive or a patio gets its surface, the grade has to come up or level out, and that is a different material from the one you see on top.

Fill dirt is the bulk layer for raising grade and building pads. It goes down first, and CA-6 follows it as the compacted base course that carries the load.

For a driveway, start with Fill Dirt if the grade is low, then CA-6 over it. CA-6 is the Illinois base material: dense graded crushed limestone with the fines left in.

A patio or paver area wants a base that compacts hard, so CA-6 works under it, with Lime Screenings as the bedding layer that levels the pavers.

For drainage, you want clean washed stone with no fines. CA-7 and 3/4" Crushed Stone are the 3/4 inch to 1 inch clean sizes for French drains, trench bedding and downspout runs.

Ground and Conditions in Ashmore

Start from the soil and work backward. Deep, dark prairie silt loam over dense clay subsoil is slow to drain, and on ground this flat the water has nowhere to go.

An under-built base shows it the first wet spring. If the grade is low, fill brings it up so the CA-6 course sits on something solid instead of soft silt.

Runoff concentrates where yards and fields shed water, and bare silt loam moves with it. Where a slope or a culvert outlet needs armoring, RipRap is the heavy broken stone for bank protection and slope work.

Work runs from the spring thaw into late fall. The ground is slow to dry in a wet spring, and winters here bring repeated freeze and thaw that shows up in gravel drives and shallow slabs each spring.

Questions About Ordering in Ashmore

What is the best base under pavers in Ashmore?

CA-6 is the base course for pavers here, because it is dense graded crushed limestone with the fines left in and it compacts into a firm layer over the clay subsoil. Lime Screenings go on top as the bedding layer that levels each paver.

If the grade is low to begin with, fill dirt comes first so the base has something to sit on.

Do you supply contractors working in Ashmore?

Yes. Illinois Rock Supply sells bulk gravel, stone, sand, topsoil and aggregates online with delivery across Illinois, and contractors order the same way: pick a quantity by the ton or by the yard, choose a delivery date, and a dump truck tips the load on site.

Delivery covers Ashmore and the surrounding Coles County area.

Order CA-6 and Fill for Your Ashmore Project

CA-6 is the base material this part of Illinois builds on, and fill dirt is what gets your grade there. Illinois Rock Supply delivers both, along with clean stone, screenings, sand and topsoil, to sites in Ashmore and across Coles County.

Order online when you are ready.