River Gravel Delivery for Arlington Heights, IL

Illinois Rock Supply handles gravel and aggregate delivery in Arlington Heights, IL. The base material here is CA-6, also called road base, a dense graded crushed limestone with the fines left in.

Arlington Heights sits on the Chicago lake plain and the northeastern moraines, where heavy silt and clay hold water instead of taking it. That ground shapes what you order for a drive, a pad or a drain.

Delivery to Arlington Heights and the Surrounding Area

You order online and pick a quantity by the ton or by the yard. Each product page has a calculator if you want to size the load before you check out.

Choose a delivery date at checkout and a dump truck tips the material on site in one pile. Bulk delivery covers Arlington Heights and the rest of Cook County, including Chicago, Cicero, Schaumburg, Evanston and Palatine.

Materials for Arlington Heights Projects

Raising grade and building pads start with fill and sub-base. Fill dirt brings a low spot up to grade, and CA-6 goes over it as the compacted base for a driveway, a parking pad or a shed and garage floor.

For a driveway, Driveway Gravel surfaces an existing drive or tops a compacted base. CA-6 is the base course underneath it, and Crusher Run is the same fines-in crushed stone under its secondary name.

For a patio or a paver walk, Lime Screenings are the bedding layer, the crushed limestone fines Illinois crews bed pavers and flagstone on. CA-16 Chips are the 3/8 inch chips for permeable paver bedding and for topping a compacted base.

For a drain, CA-7 is washed clean stone with no fines, for bedding under pipe, drainage trenches and French drains. 3/4" Crushed Stone is the CA-11 size sold alongside it for bedding, drainage and concrete work.

For concrete, Washed Sand is the coarse washed sand Illinois yards call torpedo sand. Mason Sand is the finer clean sand for brick and block mortar and paver joints.

For lawns and beds, Top Soil is screened Illinois prairie topsoil, dark and silty. Garden Soil fills raised beds and vegetable plots, and Shredded Mulch holds moisture in beds and tree rings through the summer.

Ground and Conditions in Arlington Heights

The soil across the Chicago lake plain and the northeastern moraines is heavy silt and clay, with clay-rich till inland. That ground sheds water rather than absorbing it, so an under-built base stays soft.

Flat ground here has little fall, and heavy summer downpours overwhelm yard grades and storm sewers in the older built-up areas. A clean stone drainage layer such as CA-7 or CA-11 gives that water somewhere to go.

Winters bring many freeze and thaw cycles, and frost lifts drives, walks and slabs each spring. Northeastern Illinois jurisdictions carry a frost depth of about 42 inches in the residential code, and the local building department sets the figure.

Base, driveway and paver work runs from the spring thaw into late fall. Frozen ground stops compaction through the winter, and a wet spring keeps crews off soft clay.

Questions About Arlington Heights Orders

What is the best base under pavers in Arlington Heights?

CA-6 is the compacted base course, a dense graded crushed limestone with the fines left in. Over that, Lime Screenings are the standard bedding layer in Illinois, a bed of crushed limestone fines that pavers and flagstone sit on.

The same pair works for a patio, a walk or a driveway apron.

Do you supply contractors working in Arlington Heights?

Yes. Illinois Rock Supply delivers bulk aggregate across Arlington Heights and the rest of Cook County, including Chicago, Cicero, Schaumburg, Evanston and Palatine.

Contractors order online by the ton or the yard, pick a delivery date at checkout, and a dump truck tips the load on site.

Order CA-6 and Aggregate in Arlington Heights

CA-6 is the base material for drives, pads and backfill in Arlington Heights, with clean stone, sand, topsoil and mulch to finish the job. Order online, choose your quantity and your delivery date, and Illinois Rock Supply brings it to your site.